Publicidad
I N S TA LAT I ON
S T E P 1
Decide on the location for AIRLOK, taking into consideration the type and size of bike(s) it will secure and the
type of wall it is being fixed to. Ensure there will be sufficient clear space around the AIRLOK and bicycle
taking into account furniture, opening doors etc. Check the unit is not too high to be able to safely unlock the
locking pin and remove / hang your bicycle. AIRLOK is designed for indoor and outdoor use.
Important: For Sold Secure & ART approval AIRLOK must be fitted to a solid substrate
( i.e concrete / brick / block wall ) using the security fixings supplied.
AIRLOK does not have to be fitted to a brick or concrete wall BUT it will not be as secure and will not be Sold
Secure or ART approved. Before fitting, ensure the selected wall is suitably strong and of sound construction
to support the weight of the AIRLOK and bicycle ( stud or plaster board walls may be to weak ).
AIRLOK can be fitted to a timber wall if timber is of appropriate structural rigidity and thick enough to fix with
correct timber fixings such as heavy duty wood screws ( not supplied ) but again it will not be as secure and
Sold Secure or ART approval will not apply.
Publicidad
