Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
II.Instruction of Remote Controller
Brightness and
Speed button
R
G
N o n
d y n a m i c l i g h t i n g
buttons with different colors
-
III.Instructions
How to connect the controller to Wi-Fi network?
Before Setting(Install the APP):
a) Search for "Magic Home Pro" on the App store or Google Play Store,or scan
the QR code to download it.
b) (Important)Connect your phone to home wifi network (2.4GHz wifi only).
c) Power on the device.
Now Setting:
a) Register/Login your Magic Home account.
Switch off
Switch on
OFF
ON
Non-dynamic
B
W
RGBW
Flash
FLASH
Strobe
STROBE
Fade
FADE
Smooth
SMOOTH
24-key infrared control instruction: (For controllers
with infrared function)
1. The default setting of the WIFI controller is 3
channels in the sequence of GRB (sequence of
GRBW for RGBW version, GRBWC for RGBWC
version). If you want to change the output
channel,the steps are as follows: unplug the
controller power and then plug in again. When the
light up, long press the key B for 2 to 3s, the
flickering white light means you've successfully
changed the output channel to BRG; Similarly, long
press key G will change the channel to GRB
sequence; long press key R to RGB sequence.
2. In RGBW version, press W key for RGB and white
light; long press W key for 2 seconds will switch to
W channel.
b) Open the App and Click on "+" button
on top right corner.
Publicidad
Tabla de contenido
