Technical Data - VARIXIO Pro Mag Instrucciones De Uso

Note: VARIXIO® Pro Mag must be used only by doctors and healthcare
professionals experienced in sclerotherapy protocols for the treatment of
varicose veins.
The selection of incorrect parameters in the menu or accidental interruptions of the program for
any reason may result in a sub-optimal foam, but this has not been found to represent a risk for
the patient when the foam volume injected is limited to the indicated 9 ml. In any case, if for
whatever reason, the foam generated shows large visible bubbles it is recommended to discard
the VARIXIO Pod® capsule used and to start again with a new one.
Note: Before using the VARIXIO® Pro Mag stirring device, please also read
the instructions for use of the VARIXIO® Pod capsules.
Range of use: The device is suitable only for use in interior areas of the healthcare environment.
The safety of the user cannot be guaranteed if:
•
the device is operated with accessories that are not supplied or recommended by the
manufacturer
•
the device is operated improperly contrary to the manufacturer's specifications

8. TECHNICAL DATA

Power supply unit
Input
Output
Protection class
VARIXIO® Pro Mag stirrer
Operating voltage
Power consumption, normal operation
Power consumption, standby operation
Power output
Drive
Speed range
Program selection
V AC 100 ... 240
A 1.0
Hz 50 / 60
V DC 24
40 W.LPS (limited power
source)
2 (double insulated)
V DC 24
mA 1500
W 36
W 2
W 30
EC flat motor
rpm 1000-4000 (subject to program
selection)
rotating/pressing knob
EN
6/73