Aivo Connect Alexa Manual Del Usuario página 6

Using the Automatic Mounting System
Mounting and Charging
1. Side arms on mount
automatically open via
silent step motor when
phone is detected in
front of Proximity Sensor
on mount.
Releasing Device
! The Aivo Connect is powered via a USB-C cable and coin cell phone
battery. There is no on/off switch on the device. Once plugged in,
the device will remain on unless the vehicle shuts off power when
in parking mode.
! Backup battery will continue to operate the Aivo Connect cradle arms
(open & close) after power has been disconnected or turned off.
2. Once phone is placed
in mount, arms will
automatically close
after one second. Qi
wireless charging will
start immediately.
Buttons behind cradle
arms on both sides of
device can open the arms.
One or both buttons can
be pressed.
Qi Alignment Guide
The Qi Receiver Coil is generally located in the center
area of the phone. Check with your phone's manufacturer
for specific Qi coil location. Below are some examples for
commonly used phones.
! The Qi coil on the mount is located in the center, in between the arms
and around the Infrared Proximity Sensor.
iPhone 12 & 12 Mini
Galaxy S21
! CAUTION: If device flashes red a foreign object is detected and device
must be removed to prevent overheating.
iPhone 12 Pro iPhone 12 Pro Max
Galaxy S21+ Galaxy S21 Ultra
EN 10 / 11