4.1 Installation of group I ISOFIX
& Top tether
4.1.1
Pull the grey fabric loop to pull
out both locking arms until you
hear a click sound which
indicates they are engaged.
注意
Be sure not to use the luggage hook instead of the TOP TETHER point. Check your
vehicle and look for the Top Tether sign.
Any problems which occur are usually caused by dirt or foreign objects on the insert
guides and on the hooks. Clean off any dirt or foreign objects to remedy this type of
problem.
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04
series of amendments for general use in vehicles fitted with ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX positions (as detailed in the vehicle
handbook), depending on the category of the child seat and of the fixture.
The mass group and the ISOFIX size class for which this device is intended is : 9-18kg
and ISOFIX size class is B1.
All manuals and user guides at all-guides.com
(Recommended Weight 9-18kg)
4.1.2-4.1.3
Install the seat on the forward direction, push the
ISOFIX connector into the anchor fixing joint of ISOFIX
in the vehicle until you hear two clear click noise.
click
1
12