Seamax Portable12V Electric Air Pump for Inflatable SUP and Paddle Board
The pressure setting increasement is 0.5 PSI. Press the On/Off power switch button to start the pump.
During the inflating process, you can press the Increase Air Pressure button [+] or Decrease Air Pressure Button [-] to
adjust the target air pressure value. Press the Air Pressure Unit toggle button [PSI/BAR] to switch the air pressure unit.
Pressing the On/Off power button can stop pumping manually.
During the inflating process, the LCD screen displays the inflatable product's on-going real time air pressure. The preset
target air pressure number will appear in every 3 seconds in flashing mode for the user's information.
We recommend to reconnect the Power Cord for fast check before troubleshotting!
Fault
The air pump cannot
be started normally.
Slow or abnormal
inflation.
Qualified Power Source
All manuals and user guides at all-guides.com
Troubleshooting
Inspection
1. The power source is
not plugged properly.
2. The fuse in DC plug (7)
is burnt out.
3. Overheating or
overload.
1. Check whether the
hose is blocked or
cracked.
2. The joint between the
hose and air pump or
inflatable product is not
installed properly.
3. Make sure the power
source meets the pump's
requirements 12V 15A
1. Make sure the power wire is plugged in the 12V DC
socket.
2. Change the fuse.
3. Cool the motor and restart it.
4. If the problem cannot be solved, please contact the
original seller or an authorized personnel.
1. Change the hose or make it unblocked, and check whether
the hose is cracked.
2. Reinstall the hose.
3. If the problem cannot be solved, please contact with the
manufacturer or its service agent or the similar authorized
personnel.
4. Do NOT use compact AC to DC wall convertors to power
the pump. Connect the pump car charger adapter directly to
a car's charger socket. Or use a well charged minimum 12V
7AH external lead acid battery with the optional 12V battery
connector.
Non-Qualified Power Source
Page 6
www.seamaxmarine.com 1877-907-7766
Solution