Parts List - SIHOO X1 Guia De Instalacion

User Manual
Assemble Introduction
1 2
Put the castor into the base
Insert the gaslift to the base
by pressing.
4 5
Fix the mechanism to the seat cushion Fix the back plate to the seat cushion
with 4pcs spring and small shim with 3pcs spring and small shim
and (M8*20) screws. and (M8*20) screws.
1.One chair can only bear one person's weight;
Pls read the Safety
2.Please use on the flat floor;
Instructions below
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
4.Please don't sit on the armrest, in case cause some danger;
carefully.
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don't overweight on the chair, or used as trolley;
7.Don't use sharp or hooked objects to scrape the chair and do not get it close
to the fire;
8.To avoid any harm to your fingers. Don't insert your finger into the mechanism
while sitting.
(The size will be according to regular measurements)
3
Fix the armrest to the seat cushion
with 6pcs spring and small shim
and (M8*20) screws.
6
Put the mechanism into the gaslift.
then the chair is assembled.
Functions
(The size will be according to regular practice)
Seat height
adjustment
Backrest tilt angle
adjustment

Parts list

(The size will be according to regular measurements; Have one extra backup)
Seat cushion:1pc Backrest:1pc
Hex wrench:1pc Shim:13+1pcs
Gas lift:1pc Mechanism:1pc
0 1 2 3 4
Notice: Before installation, pls classify the screw, measure the screw lengh for easy assemble.
Backrest tilt tension
adjustment
Armrest:1pair Base:1pc
Spring:13+1pcs Castor:5pcs
Mechanism screw / Back plate screw / Armrest screw(M8*20):4+3+6+1pcs
5 6 7 8 9 10 cm