Mobli Cuckoo Manual Del Usuario página 13

FASTENING INSTRUCTIONS
Cuckoo must be fixed to the wall before being used. This activity should only
be performed by a competent adult.
a. Choose where you want to place Cuckoo, take a pencil and make a mark in
the hole of the back panel.
b. Remove Cuckoo and drill a hole in the wall using a drill with a 6 mm
diameter bit.
c. Insert the dowel provided in the hole you have made.
d. Put Cuckoo back on the wall and fasten the screw in the dowel to secure
the structure.
Caution: Do not tighten the screw tight, otherwise the back panel (G) may
bend. Make sure the base of Cuckoo is well positioned on the ground before
fixing it to the wall. Before drilling, check the compliance of the wall so that
the locking devices can withstand the forces generated.
e. Now slide the head extremity (H) into the guides.
EN
13