Publicidad
Idiomas disponibles
Idiomas disponibles
10. To drink, gently place nipple/soft spout (A3) near baby's mouth and allow baby to suck naturally. Consult
with your pediatrician should you have any feeding problems or questions.
a. When feeding baby the vent (A4) in the nipple/soft spout (A3) should be facing upwards to minimize
liquid covering the vent.
11. When finished drinking, replace dust cap (A1) on top of bottle to help minimize exposure of nipple/soft spout
to potential contaminants.
Note: Before each use, pull on the nipple/soft spout in all directions to inspect for damage. Discard immediately at
any sign of damage or weakness.
Stainless Steel Vacuum Insulated Wide Mouth Baby Bottle with Hard Sippy Cap:
1. Remove lid (A) by twisting counterclockwise.
2. Remove dust cap (A1) by pulling upwards.
3. Remove silicone sippy valve (A3) by pulling tab from underside of
hard sippy cap (A2).
4. Silicone sleeve (C) on bottle (B) does not need to be removed.
5. Wash all parts separately with warm, soapy water and allow to completely
dry before re-assembling.
6. Ensure silicone sippy valve (A3) is properly seated to minimize leaking.
7. Fill bottle with contents. Do not overfill: leave space for lid (A) to avoid overflow.
8. Replace lid (A) by twisting clockwise.
9. To drink, gently place hard sippy cap (A2) near child's mouth and allow child to
suck naturally. Consult with your pediatrician should you have any feeding problems or questions.
a. When feeding baby the vent (A4) in the nipple/soft spout (A3) should be facing upwards to
minimize liquid covering the vent.
10. When finished drinking, replace dust cap (A1) on top of bottle to help minimize exposure of nipple/soft
spout to potential contaminants.
Note: Before first use, pinch the tip of the silicone valve. Control silicone valve flow rate by tightening or loosening cap.
Valve in hard sippy cap is removeable for fastest flow.
Stainless Steel Vacuum Insulated Wide Mouth Baby Bottle with Flat Cap:
1. Remove lid (A) by twisting counterclockwise.
2. Remove silicone gasket (B) from underside of lid (A).
3. Remove silicone sleeve (D) on bottle (C) does not need to be removed.
4. Wash all parts separately with warm, soapy water and allow to completely
dry before re-assembling.
* Image for reference only: actual product may vary
A1
A2
A
A3
A4
B
C
A
B
C
D
Publicidad
