Plug & Play; Safety Instructions - LORGAR LRG-CMT521 Manual Del Usuario

PLUG & PLAY
Plug the USB cable into the USB port of your computer. Your computer will
automatically recognize the USB device and install a driver. The driver will
be installed automatically. If the microphone is not picking up sound, please
follow the instuctions below:
Problem
A computer couldn`t
identify the USB devices
The microphone is
detected but no output of
the sound
The microphone is
detected but no output of
the sound after updating
Windows 10

SAFETY INSTRUCTIONS

Read carefully and follow all instructions before using this
product.
1. Do not expose the device to excessive moisture, water or
dust. Do not install in rooms with high humidity and dust level.
2. Do not expose the device to heat: do not place it close to heating
appliances, and do not expose it to direct sun rays.
3. Clean the device with dry cloth only.
Lorgar Voicer-521 includes a standard 1/8"
(3.5mm) headphone jack for monitoring
and playback
Solution
Please restart a computer and connect
the microphone to another USB port.
Make sure that System Sound isn`t
mute and you haven`t set a microphone
volume to minimum.
To let apps access the
microphone, please select
Settings>Privacy>Microphone, then
turn on Allow apps to access your
microphone.