DWT WS10-125 LTN Manual Original página 9

Symbol
Serial number sticker:
WS ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Possibility to select between
two positions of additional
handle�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Prohibited�
Double insulation / protec-
tion class�
Attention� Important�
Meaning
English
9
Symbol
power tool designation
The power tool is intended for dry cutting, grinding and
sanding of metals (and other materials)�
The area of the tool application can be expanded due
to use of additional accessories�
There is a possibility of a stationary installation of the
power tool by use of some special accessories�
Power tool
components
1 Protective casing
2 Reducer
3 Spindle lock
4 Ventilation slots
5 Additional handle
6 Body
7 Lock-on button
8 On / off switch
9 Flange wrench *
10 Mounting lug
11 Screw
12 Spindle
13 Flange
14 Disc *
15 Clamping nut
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation
of power tool elements
Before carrying out any works on the power tool it
must be disconnected from the mains.
Do not draw up the fastening elements
too tight to avoid damaging the thread.
Additional handle (see fig. 1)
Always use the additional handle 5 when operating�
Additional handle 5 may be positioned as deemed
comfortable by the user�
• Unscrew additional handle 5 as shown on fig. 1.1.
• Screw additional handle 5 into another threaded
opening (see fig. 1.2).
Meaning
Wear protective gloves�
Do not dispose of the power
tool in a domestic waste
container�
DWT