Site Location - HACH LANGE HIAC 9703+ Manual Del Usuario

Installation
C A U T I O N
Personal injury hazard. Only qualified personnel should conduct the tasks
described in this section of the manual.

Site location

Position the instrument on a dry, level surface. The location must be
indoors and near an electrical outlet and a computer. Make sure the power
switch is accessible.
8 English
Install the HRLD or MC05 sensor
The sensor is held in place by the holding arm. A sampling probe and
tubing must connect to the sensor for sample flow. A cable must connect
to the sensor for signal transmission. To install a sensor, refer to
sensor on page 9 or MC05 sensor
Note: Do not put Teflon tape on the fitting threads.
HRLD
on page 11.