Listening To Records - Teac MC-D800 Manual Del Usuario

Touch pairing
If the other Bluetooth device supports NFC, you can
pair it with this unit using the following procedures .
1 Press the CD/Bluetooth/USB button to
select "Bluetooth".
o You cannot use touch pairing if another function
is selected .
2
Hold the antenna of the device that
supports NFC toward the touch pairing
reader.
Do this within two seconds of selecting "Bluetooth" .
The touch pairing reader is on top of the unit near
the record needle resting place . When shipped new
from the factory, it is covered with a sticker .
Device that supports NFC
(smart phone, etc . )
o Hold the device that supports NFC within 2 cm
of the touch pairing reader .
o Be careful not to bump the record needle when
holding the device that supports NFC .
Touch pairing reader

Listening to records

Before using the record player, use a coin or other tool
to turn the transport locking screw clockwise until it
stops . Remove the stylus cover (made of white plastic)
(page 23) .
1 Press the PHONO/AUX button to select
"PHONO".
Z
Each time the PHONO/AUX button is pressed,
PHONO (record) and AUX (external component) are
selected alternatively .
2 Open the turntable cover slowly.
V Be careful not to pinch your hand, for exam-
ple, when opening and closing the turntable
cover.
Continued on the next page
45