Descargar Imprimir esta página

RIB APP8050 Instructions página 8

Para administrar la unidad de control a través de bluetooth 4.2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

G
B
APP
is a device that allows the management via Bluetooth 4.2 of compatible RIB control panels.
The range of the BT signal in open space is about 60m.
led DL1 - used to signal the module status: 3 seconds lit on start / flashing every second during communication.
·
LED flashes every 1 second
·
LED flashes every 3 seconds
·
LED off
·
LED on steady
FUNCTIONS AVAILABLE WITH RIB CONTROL PANELS L1, L1 24V, B2, B2 24V, B2D 24V, P1, P1 24V
THE APP+ CARD ALLOWS THE APP TO IDENTIFY THE TYPE OF Pc board. THE APP SHOWN THESE SPECIFIC PARAMETERS FOR ITS CONFIGURATION
CONTROL PANEL
INSTALLER / ADMINISTRATOR-OWNER / USER PARAMETERS
8 digits ACCESS CODE TO THE APP (excludible)
DISPLAY OF AVAILABLE PLANTS
OPEN-STOP-CLOSE BUTTON
PEDESTRIAN BUTTON
GATE CONTROL ACTIVATION WITH SMARTPHONE SHAKING (excludible) - Android only
DISPLAY OF CYCLES EXECUTED
Pc board FIRMWARE UPDATE
INSTALLER / ADMINISTRATOR-OWNER PARAMETERS
REMOTE CONTROLS ACTIVATION
SMARTPHONE ACTIVATION
WAITING TIME FOR AUTOMATIC TOTAL CLOSING
WAITING TIME FOR AUTOMATIC PEDESTRIAN CLOSING
PEDESTRIAN OPENING TIME
BUZZER
WARNING LIGHT "GATE/BARRIER OPENED"
FLASHER
PREFLASHING
"GATE OPENED" BLOCK
"ALWAYS CLOSE" COMMAND
DISPLAY CARD APP SERIAL NUMBER
DISPLAY CARD APP FW VERSION
DISPLAY CARD APP HW VERSION
DISPLAY Pc board SERIAL NUMBER
DISPLAY Pc board FW VERSION
DISPLAY Pc board HW VERSION
INSTALLER PARAMETERS
FORCE (TORQUE)
SPEED (RUN)
SPEED SLOWDOWN AT THE END OF OPENING
SPEED SLOWDOWN AT THE END OF CLOSING
SPEED SLOWDOWN AT THE END OF OPENING/CLOSING
MOTOR 1 - SLOWDOWN SPACE AT THE END OF OPENING
MOTOR 1 - SLOWDOWN SPACE AT THE END OF CLOSING
MOTOR 2 - SLOWDOWN SPACE AT THE END OF OPENING
MOTOR 2 - SLOWDOWN SPACE AT THE END OF CLOSING
SENSITIVITY OF CURRENT SENSOR
PROGRAMMABLE AUXILIARY RELAY CONTACT
EDGE 1
EDGE 2
PHOTOCELL 1
> correct operation
> no communication with the control unit (serial interrupted)
> failure or power failure
> card locked (remove and restore power supply)
L1
L1 24V
B2
WITH
BATTERIES
8
B2 24V/B2D 24V
P1
WITH BATTERIES
P1 24V
WITH
BATTERIES

Publicidad

loading