Hama AV Selector 310 Manual Del Usuario página 11

All manuals and user guides at all-guides.com
00042549bda 21.12.2005
L Operating instruction AV Selector 310 L
2. Transferring data
• If you would like to transfer data from input A (e.g. your camcorder) to the
video recorder at connection B, switch the camcorder to playback mode
and the video recorder to record. The green A LED illuminates.
• If you would like to transfer data from input C (e.g. your Sat receiver) to
the video recorder at connection B, switch on the Sat receiver, switch off
the appliance at input A and switch the video recorder to record. The
green C LED illuminates.
Instead of a Sat receiver, you can also connect another video recorder to
alternatively transfer data between the two appliances.
3. Enhancer
If the image is too weak or too dark, the video signal can be amplified using
the Video Enhance button. Once this button is pressed, the green LED
begins to illuminate.
Note: If you do not wish to let your television switch to AV in this manner,
you must switch it to AV using the remote control or on the appliance itself.
If you would like to view an incoming channel using an antenna/cable con-
nection, select the desired channel on your television instead of the AV
input.
11:20 Uhr Seite 11
9