Transport; Storage; Care And Maintenance; Troubleshooting - Kärcher NT 48/1 Manual Original

Ocultar thumbs Ver también para NT 48/1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
Turn off the appliance
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the dirt container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Storing the Appliance
Illustration
 Store the suction pipes, the suction
hose and the mains cable as shown in
the illustration.
 Place the appliance in a dry room and
secure it from unauthorized use.

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Illustration
 Transport the appliance as shown in the
illustration.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Storage

CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Change cartridge filter
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Loosen the mounting nuts
 Remove the cartridge filter.
 Insert the new cartridge filter.
 Insert the fastening nut and tighten it.
 Insert and lock the suction head.

Troubleshooting

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Suction turbine does not run
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
 Turn on the appliance.
Vacuum turbine is running but the
machine is not sucking in dust/dirt
– Float is blocking the suction canal.
 Empty the dirt container.
Suction capacity decreases
 Remove choking of suction nozzle, suc-
tion tube, suction hose, or cartridge fil-
ter.
 Exchange the paper filter bag.
 Change cartridge filter.
Dust comes out while vacuuming
 Check the proper installation of the car-
tridge filter.
 Change cartridge filter.
Customer Service
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
EN
– 3
13

Publicidad

Tabla de contenido
loading

Tabla de contenido