Lexmark MarkNet N7000 Serie Guia De Instalacion página 5

Step 1: Before setting up
Before setting up your print server, make sure the printer has been set up correctly.
• Your printer is plugged in.
• Your printer is turned off.
• The toner or print cartridges are installed.
• Paper is loaded.
• Your printer is located near an Ethernet network connection.
• Your printer is not connected to any other device.
For help, see your printer documentation
Step 2: Connect the print server to the network.
Select the configuration that applies to your current setup.
Note: An Ethernet cable is required. It is not included with your print server. You must purchase it separately.
1