EN
10
SAFETY INSTRUCTIONS
•
Do not expose this unit to rain.
•
Do not place objects filled with liquids, such as vases, on top of this unit.
•
Use only the recommended accessories.
•
Do not attempt to repair this unit yourself.
•
Do not drop metal objects into this unit.
•
Do not place heavy objects on top of this unit.
•
Do not block the air vents.
•
Do not install near any heat sources such as radiators, stoves, ovens, or
other apparatus (such as amplifiers) that produce heat.
Power cord / power supply unit - To reduce the risk of fire, electric
shock and damage:
•
Make sure that the voltage of the power supply corresponds to the
value indicated on this device.
•
Plug the power supply completely into the power outlet
•
Do not pull the cable, bend it or place heavy objects on it.
•
Do not touch the plug with wet hands.
•
Hold the plug by its body when unplugging.
•
Do not use a damaged power plug or outlet.
•
Install this product so that the power cord can be unplugged
immediately if any interference occurs.
Power adapter: The power adapter can be operated with alternating
current of 220 - 240 V. Use a suitable plug adapter if the plug does not fit
into the mains socket.
Small objects/packaging parts (plastic bags, cardboard, etc.): Keep
small objects (e.g. screws and other assembly materials, memory cards)
and packaging parts out of the reach of children so that they cannot be
swallowed by them. Do not allow small children to play with foil. There is a
danger of suffocation!
Setup
•
Place the device on a dry, level, waterproof and heat-resistant surface.
•
Find a location where children cannot reach the appliance.
•
The power outlet must be easily accessible so that the appliance can be
quickly disconnected from the power supply in an emergency.
•
Do not install or position this appliance in a bookshelf, built-in closet or
other confined space. Ensure that the unit is well ventilated
•
Do not place the unit on top of amplifiers or other equipment that may
become hot. This heat could damage the unit.
•
Do not expose this unit to direct sunlight, high temperatures, high
humidity or excessive vibration.