Philips SBC RU631/87 Instrucciones De Manejo página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
XP SBC RU 631/87 2002
All manuals and user guides at all-guides.com
Instructions for use
SET-UP FOR USE
A d v i c e
Carefully read the complete procedure before starting!
Your equipment is a Philips brand:
1
VCR
Press the mode selector key for the device you want to
TV
SAT
operate.
2
Press the power key to test.
– The green indicator LED under each device (TV, VCR or
SAT) lights up to confirm the mode you're in.
C h e c k
Press a few keys to check correct response.
Your equipment is of another brand, or your
equipment is a Philips brand, but not all keys
respond correctly:
1
Press the mode selector key to select the device (TV, VCR
VCR
TV
SAT
or SAT) you want to operate.
2
Look up the brand name of the device you want to
operate in the code list (centre of this manual).
Make sure you choose the correct code list for your device!
3
Make sure the device is switched on.
4
Press and hold keys 1 and 3 simultaneously - for about
1
3
three seconds- until the green LED lights up. (Release the
keys: the green LED should stay on)
-
5
1
9
Enter your 4-digit code using the number keys, within
30 seconds.
– The green LED flashes twice.
C h e c k
That's it! Press a few keys to check correct response. If
response is not correct, repeat procedure beginning at step 1.
N o t e
- If the LED displays one long flash, the code was not
recognised. Please go back to step 1 and repeat the
procedure, using the next 4-digit code in the list.
- If no key is pressed within 30 seconds, you have to start
again at step 1.
A d v i c e
Carefully read the complete procedure before starting!
You do not know the brand of your
equipment/you can not find the right code in
the code list » auto search:
1
Press the mode selector key to select the device (TV, VCR
or SAT) you want to operate.
VCR
TV
SAT
2
Make sure the device is switched on (if the device is a
VCR, please insert a tape and start playback).
3
Press and hold keys 1 and 3 simultaneously -for about
1
3
three seconds- until the green LED lights up.
(Release the keys: the green LED should stay on)
4
15-10-2001 12:45
Pagina 4

Publicidad

Tabla de contenido
loading

Tabla de contenido