Makita DCL500 Manual De Instrucciones página 6

Insert the zoom pipe into the end of the
handle.
1
2
Loosen the zoom pipe ring and adjust the
pipe length. After adjustment, tighten the
ring.
1
Attach the nozzle to the zoom pipe.
Attach the crevice nozzle to the handle or
zoom pipe to use to clean crevices and other
narrow, hard-to-reach areas.
1
Attaching the shoulder belt
CAUTION:
• When hanging the appliance on your
shoulder, always hold the appliance itself
by hand to prevent it from dropping.
Dropping the appliance may cause injury
or property damage.
6
1. Handle
2. Zoom pipe
1. Ring
1. Nozzle
1
1. Crevice nozzle
Use the shoulder belt to hang the appliance
on your shoulder for cleaning a high place.
Loop the shoulder belt around both the
carrying handle and the belt holder and then
run it through the stopper as shown in the
diagram.
Pull the ends of the belt up so that they are at
least 50 mm (2") from the top of the stopper.
50mm
Attach the hose hook at around the midpoint
along the hose. Store the shoulder belt in the
hose hook when not using it.
1. Hose hook
1