Installation; Tools Required; Screwing In Nozzles; Screwing The Injector Nozzle Onto The Module - Miele A 623 Instrucciones De Manejo

Screwing the in-
jector nozzle onto
the module

Tools required:

- 9 mm Spanner (WAF 9)

Screwing in nozzles

Lift up the support on the injector nozzle and screw the injector

nozzles into the required position .
Use the open spanner to tighten the injector nozzle .

Slide the support on the injector nozzle downwards until it rests on

the water supply pipe .
Screw the other injector nozzles into the required positions.
en - Installation
37