Becken BCHT2338 Manual De Instrucciones página 9

• Insert the screws into the nuts and tighten them.
• Put up the cooker hood onto the fixed screws.
• Fix the hood onto the wall, as shown in the method of image B.
• Put the one-way valve onto the cooker hood.
Method two:
• Drill 6 holes of 4 mm in diameter at the bottom of the hanging
cupboard.
• Place the one-way valve on the cooker hood, install the cooker hood
on the bottom of the cupboard, and then tighten the hood with the
6 screws included.
• Install the adjusted board on the bottom of the hood in order to
close the gap between the back of the hood and the cupboard.
AF Manual Instruções EXAUSTOR BCHT2338 A5.indd 9
Cooker Hood | Campana extractora | Exaustor
EN
B
9
03/07/17 11:14