ForMe FSI-1601 Manual Del Usuario página 4

HOW TO FILL WATER:
Pull up the cap of water fi lling mouth, fi ll until full, push the cap back to its original position.
HOW TO DRY IRON:
1. Turn the temperature regulating knob to " 0 " position, turn the steam knob to "—" position, plug the
wire cord to the socket.
2. Turn the temperature regulating knob to the temperature scale according to the cloth's fabric, the
indicator w ill light on, then place the iron on the smooth and stable place vertically.
er the indicator goes out, you can begin to iron.
HOW TO SPRAY:
Press the spraying button repeatedly, steam will be sprayed out from the spraying mouth, at that time, you
should keep enough water in the water tank.
HOW TO IRON WITH STEAM:
1. Fill water in the water tank.
2. Use steam ironing, turn the steam knob to the ".." or "..." position, the method for regulating temperature
is the same with one of dry ironing.
er indicator goes out, turn the steam knob to the "+" position, steam will be sprayed, you can start
to iron.
er ironing complete, turn the temperature regulating knob to the " 0 " position, pull out the plug, take
off the water tank. pour out the remaining water, turn the steam knob to the "—" position.
HOW TO USE STRONG STEAM:
Press down the strong steam button, the base plate will spray out a strong steam. Attention: Strong steam
must be used in steam ironing. ( The temperature regulating knob must be turned to the steam section ).
VERTICAL STEAMING:
Hang clothes on " clothes hangers " or hangers. Hold the iron vertically at a distance of 15-30 cm from the
piece of clothing. It is not recommended to perform vertical steaming for synthetic fabrics. While steaming,
do not touch the fabric with the soleplate of the iron to avoid melting.
The self-cleaning process starts by pressing the Self-cleaning button or by turning the switch into the
Self-cleaning position. In case if there is dirt inside, it will come out of the holes of the irons's soleplate. The
self-cleaning function should be performed once a month.
IMPORTANT SAFEGUARDS:
• When using steam ironing, you are recommended to use distilled water.
• During the iron is electrifi ed, user must not leave, must not let children touch the iron.
• When fi lling water or pouring out remaining water please pull out the wire cord plug fi rst.
er using, turn the steam knob to " —" ,turn the temperature regulating knob to " 0 ", pull out the plug,
put the iron on the fl at and stable place vertically.
• The plug must be removed from the socket-outlet before the water reservoir is fi lled with water.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
WASTE MANAGEMENT:
The symbol above and on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial
waste at the end of its useful life. The Waste of Electrical and Electronic Equipment (WEEE)
Directive (2002/96/EC) has been put in place to recycle products using best available
recovery and recycling techniques to minimise the impact on the environment, treat
any hazardous substances and avoid the increasing landfi ll. Contact local authorities for
information on the correct disposal of Electrical or Electronic equipment.
unattended while it is connected to the supply mains.