Questions?
Use this
problem
solver!
The Problem Solver
Chimneg
Hood
PROBLEM
POSSIBLE CAUSE
FAN AUTOMATICALLY
TURNS ON OR INCREASES
IN SPEED AND CAN NOT
BE TURNED OFF OR
LOWERED IN SPEED
FAN DOES NOT
OPERATE WHEN
TURNED ON
The hood fan will turn on automatically
or automatically
increase in
speed if cooking
temperatures
become too hot. The fan will turn off
automatically
or decrease
in speed when temperatures
cool to an
appropriate
level. Fan will also turn on automatically
when the hood
electronics
are too hot.
NOTE: When the automatic
fan feature
is on, you can set the fan to
a higher setting but not to a lower setting or off.
A fuse may be blown or a circuit breaker tripped. Replace fuse or
reset circuit breaken
The power disconnect switch inside the hood may be switched of/
Remove the metal grease filter and the charcoal filter (if present} and
flip the switch on.
LOCATE ON/OFF SWITCH.
1. Press in to release and lower the filter cover panel at the front.
2. Push the filter latch toward the opening and pull downward
to remove.
3. Remove the charcoal filter, if present.
<.o
Presscorners
Filtel
latch
S. Press switch to ON position.
O
Push-bu_on
switch
(horizontal
view from
inside
opening)
NOTE: If the hood blower needs to be removed for service, use the
disconnect switch for your safety. Pressthe switch to the OFFposition.
4. Reach into the motor compartment
and locate the ON/OFF switch
at the front of the opening.