English - jbc ADVANCED Serie Manual Del Usuario

We appreciate the confidence you have shown in JBC by purchasing this
equipment. It has been manufactured with the highest standards of quality in order
to give the best possible service. Before using this apparatus, we suggest you
read through the following instructions carefully.
TI 2650
Thermometer for
soldering irons
Ref. 2650000
Technical specifications
· Temperature range:
· Type of thermocouple:
· Accuracy reading:
· Ambient temperature correction:
(68°F)
· Display resolution:
· Dimension
· Weight:
Caution
- Do not measure more than 0 - 500°C (40°-920°F)
soldering iron.
- Do not push iron tip strongly onto the sensor
when measuring.
Unit maintenance
- Clean the sensor periodically removing old
solder flux residues.
Display
0 - 500°C (40°-920°F)
E (NiCr-CuNi)
Full scale ± 2%
Fixed at 20°C
10°C (20°F)
Width : 115 mm
Height: 100 mm
Deepth: 145 mm
0.7 Kg
Cable connector to check the sleep
temperature Ref. 0780476
How to use
Checking the working temperature of the soldering
iron:
1. The soldering tip must be well tinned.
2. Apply solder in the center of sensor.
3. Wait a moment until the reading temperature
becomes stabilized.
4. Read the temperature.
1

ENGLISH

Screw adjustment at
ambient temperature
Sensor
Ref. 0851020
The TI 2650 is
supplied with
one sensor.