Tabla De Contenido; Warning - Noark Electric Ex9LDS 2CO 230V Manual De Instrucciones

Contents
Warning ....................................................................................................
Characteristics .......................................................................................
Symbol, Connection, Description ...................................................
Technical parameters ..........................................................................
Light sensor, Control description ..................................................
Mode precedence, Language settings .........................................
Menu overview ......................................................................................
Light functions setting .......................................................................
Date and time setting .........................................................................
Time program ........................................................................................
Setting the switching modes ...........................................................
Setting options ......................................................................................
Deleting of all programs, Reset .......................................................
An example of programming .........................................................
2

Warning

2 Device is constructed for connection in 1-phase main alternating current
voltage 230 V and must be installed according to norms valid in the state
3
of application. Connection according to the details in this direction.
Installation, connection, setting and servicing
4
by qualifi ed electrician staff only, who has learnt these instruction
6
and functions of the device. This device contains protection against
overvoltage peaks and disturbancies in supply. For correct function
7
of the protection of this device there must be suitable protections of
8
higher degree (A, B, C) installed in front of them. According to standards
elimination of disturbancies must be ensured. Before installation the main
9
switch must be in position "OFF" and the device should be de-energized.
10 Don´t install the device to sources of excessive electro-magnetic
interference. By correct installation ensure ideal air circulation so in case
12
of permanent operation and higher ambient temperature the maximal
operating temperature of the device is not exceeded. For installation
14
and setting use screw-driver cca 2 mm. The device is fully-electronic -
18
installation should be carried out according to this fact. Non-problematic
function depends also on the way of transportation, storing and handling.
20
In case of any signs of destruction, deformation, non-function or missing
21
part, don´t install and claim at your seller it is possible to dismount the
device after its lifetime, recycle, or store in protective dump.
22
should be installed