Ebode IR Link Serie Guia Del Usuario página 4

All manuals and user guides at all-guides.com
The IR Link Pro Mini Kit is a mains powered InfraRed Extender System that allows full remote
control operation of audio/video components (such as your Blu-ray player, A/V Receiver,
DVR, Satellite Box, Cable Tuner, etc.) which are located behind closed cabinet doors, in other
rooms, or other concealed and/or out-of-sight locations.
An InfraRed Extender in general consists of an IR (InfraRed) capture device, the IR Receiver,
a distribution circuit/connecting block, the IR Hub, and finally the IR LED output, the IR
Emitter, which flashes the IR signal to the A/V component.
3. Kit content
The IR Link Pro Mini Kit is a pre-packaged InfraRed Remote Control Extender System. It
includes an IR Link Pro Mini Surface Mount IR Receiver, an IRHUB4 Connecting Hub with 4
Emitter outputs + Status input Jumper Cable, one 3IREDB Triple Blinking IR Emitter, one
3IREDH Triple High Power IR Emitter, a 1IRQC Quick Connect cable and a 12VDC Power
Supply. These parts are all that are necessary to control up to 7 components.
4. How does the ebode IR Link Pro Mini work?
The ebode IR Link Pro Mini is intended for use in IR control systems where the IRHUB4
Connecting Hub is within reach of the 3-meter cable of the IR Link Pro IR Receiver, e.g.
when installing the IR Link Pro Mini in a cabinet where the controlled components are behind
closed doors, and the IR Link Pro Mini Receiver can be positioned outside of the cabinet, for
instance close or attached to your flat panel, but always within line of sight of your hand held
remotes.
5. Installing the ebode IR Link Pro Mini
The IRHUB4 sockets are colour coded for easy plug & play installation of the IR Receiver and
IRED Emitters, which have coloured jacks.
A typical system is shown in Fig. 1 below. Refer to this diagram and the procedure that
follows when making connections:
1. Attach the 3IREDB and/or the 3IREDH IR Emitters onto the IR
Sensor Windows of the components in your system that you wish to
control. Refer to Fig. 2.
Tip: By using a flashlight to shine on the display of your Audio/Video
device, you can easily see where to place the emitters.
21-2-2014 4 IR Link Pro Mini