Area Of Use; Installing The Battery; Switching The Phone On/Off; Functions Of The Keys - Doro ip700wifi Manual Del Usuario

Area of use

The product is intended for indoor usage. It
should not be exposed to extremely high or low
temperatures. The product is not resistant to
moisture or careless treatment.
Please note!
Do not attempt to disassemble or repair the product.

Installing the battery

1.
When removing the battery, make sure that the
phone is switched off.
2.
Slide the battery release button upwards and lift
the battery off the phone.
3. When installing the battery, slide the release button
upwards.
4. Align the metal contacts on the battery with the
contacts inside the battery compartment.
5.
Press the battery downwards until it fits into the
battery compartment, then release the the battery
release button.
Charging
Connect the charger to an electrical wall socket and
to the charger socket of the phone.
The LED light will turn orange. When charging is
complete 3 (approximately 2 hours) the LED
light will turn green. Fully-charged batteries will last
for approximately 40 hours in stand-by or 2 hours
operational. Battery consumption is depending on
the network and SIP-server conditions.
All manuals and user guides at all-guides.com
English

Please note!
Before initial use the batteries must be charged for 4
hours.
Important!
Never use the charger if the plug is damaged.

Switching the phone on/off

Press and hold for a few seconds to
L
switch the phone on or off.

Functions of the keys

The left and right function keys are, together
with the navigation key, essential when
handling the phone and its menu structure.
The left function key is generally used for
confirmation of choices, saving a chosen
setting or to get deeper into the menu system.
The right function key is instead used to return
to the previous, higher level in the menu
system or to delete or cancel an incorrect entry.
Another way of returning to the previous,
higher menu level is to use
The navigation key is used to scroll in the
option lists of the menu or to move the
marker. This is done by pressing the upper or
lower part of the key. In some cases it is also
applicable to press the left or right part of the
navigation key to change a specific setting.
Typing is done with the number keys: 1 to 9. 0
is used to create space and
method.
.
L
to switch input