Descargar Imprimir esta página

Kingfisher DG1903 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
Use
The controls
1.
Plug in the appliance you will here a beep.
2. This appliance can be operated by the control panel located on the top of the appliance or by the
remote control:
STANDBY button
:
SPEED button
:
TIMER button
:
MODE button
:
Nature mode:
Sleep mode:
COOL button
:
SWING button
:
194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 9
194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 9
Press the button
to turn the unit ON and OFF.
Press the button
to change fan speed level, different speed level shows
different indicator light colour:
Red: low speed
Yellow: medium speed
Green: high speed
Press the button
once to select one hour for instance on the control panel,
and the product will switch off after 1 hour. Each time you press the button, you
increase by 1 hour. The maximum timer setting is 7 hours. Once the time is set,
the air cooler can work automatically according to the fixed time until cutting
the power. To cancel the Timer setting press the TIMER button again until all the
timer indicators are dark.
Press the button
to have different wind mode, normal wind, natural wind and
sleeping wind.
Fan will simulate natural wind according to preprogrammed wind speed
changes.
The design purpose for sleeping mode is to simulate time spending when fall
into sleep, the higher sleep mode, the longer time before constant in low speed.
Level 1: simulating of light and quiet nature wind.
Level 2: after about 30 minutes simulating of medium nature wind , then
constant in low speed level.
Level 3: after about 30 minutes simulating of high nature wind and 30 minutes
medium nature wind , then constant in low speed level.
Press the
button to select cooler function. When the indicator light flashing
it means the water level is below minimum limited and should add water into the
water tank. If not in cool mode, appliance is operating in fan mode only.
Press the
button to start the vertical louvers (black louvers on the back)
automatically moving from side to side. To stop the louvers press the vane
button again. Manually adjusting the horizontal louvers (white louvers on the
front) you can direct the air as you please.
4
2
1
09
13-12-2019 14:00:58
13-12-2019 14:00:58

Publicidad

loading

Productos relacionados para Kingfisher DG1903

Este manual también es adecuado para:

505934001932105059340019338