Charcoal Filters; Hood Surface - Electrolux EJIB369TDJS Manual De Instrucciones

41 electrolux care and cleaning
Replace lights
If the halogen lamps need replacing,
they must be replaced by lamps with
an aluminium reflector, never dichroic
lamps, to avoid unnecessary
overheating in the lamp holders.

Charcoal Filters

• If the model is not vented to the
outside, the air will be
recirculated through disposable
charcoal filters that help remove
smoke and odors. The charcoal
filters cannot be cleaned.
• They must be replaced.
• The charcoal filters should be
replaced every 4-6 months
(depending on hood usage).
All manuals and user guides at all-guides.com
To replace the charcoal filters
please follow the following
steps:
• Take out the grease filter.
• Unscrew the metallic cover.
• There is one charcoal filter in each
side of the motor.
• Turn the charcoal filter to unlock it
and take it out.
• Install the new filter and turn it to
lock it.
• Assemble the metall cover and
the grease filter.
DO NOT rinse, or put charcoal filters
in an automatic dishwasher.
Charcoal filters are not included with
the hood.
They must be ordered from your
supplier.
Order the needed kit specifying your
hood model and width size.
Cleaning
Always use the mildest cleaner that
will do the job. Use clean, soft cloths,
sponges or paper towels.
Rub stainless steel finishes in the
direction of the grain. Wipe area dry to
avoid water marks.
After cleaning, place all parts in their
proper positions before using.
The cleaners recommended below
indicate a type and do not constitute
an endorsement. Use all products
according to package directions.

Hood Surface

Painted Surfaces: For general care,
wipe the outside of the hood with
sudsy water or household cleaners,
rinse well and dry with a clean soft
cloth to avoid water marks.
Stainless Steel Surfaces: Wipe and
dry stainless steel in the same
direction as the grain. Avoid using
too much pressure, which may mar
the surface. To remove finger prints
and give added shine. Do not allow
any cleaning compounds to remain in
contact with stainless steel for
extended periods.
care and cleaning electrolux 42
Plastic surfaces: Wipe with a moist
soapy sponge.
Aluminum Mesh Filters: Clean filters
in the dishwasher or by agitating in
sudsy water. Ensure that there is no
soil trapped in the fine mesh.
Dry the filters before reinstalling them.
Anodized Aluminum surfaces: top
cap is not removable. Wash top and
underside with hot sudsy water.
Rinse and wipe dry. First to a clean
sponge or paper towel and
wipe clean.
Do not use powdered cleansers or
steel wool pads.