Start-Up; Measuring Length - Powerfix Profi 278296 Instrucciones De Utilización Y De Seguridad

Start-up



Measuring length


 
P ress the ON/OFF button
device on. If you do not press any button for
60 s, the display
 
T o switch the device off manually, hold the
ON/OFF button pressed down for 3 sec-
onds, until the display goes out and a double
tone signal sounds.
 
P ress the MODE button
the display shows the symbol for length meas-
urement „
tion 0.00m (or 0'00").
 
H old the reference area
rangefinder at the start point of your meas-
urement. Hold the device in such a way, that
the reference area is aligned parallel to the
target area of the measurement.
 
I f necessary use the level indicator
align the ultrasonic rangefinder horizontally.
The air bubble of the level indicator should
be between the two markings
alignment is horizontal.
 
P ress the READ button
projects a dot of light onto the end point of
the measurement. This dot of light will help you
to correctly align the ultrasonic rangefinder.
After successful measuring, the length will
appear in the display.
26 GB/IE
shuts down.
10
8
" as well as the length designa-
4
to switch the
9
repeatedly, until
of the ultrasonic
6
7
if the
. The laser diode
to
11