G Operating instruction
1. Safety notes
Warning
• The wall switch is part of the building
installation. The relevant standards and
guidelines of the respective country are to be
observed during planning and installation.
The device may only be operated on a 230 V
50 Hz AC voltage supply. Work with the 230
V mains supply may only be carried out by
electricians certified in your country. The
applicable accident prevention regulations are
to be observed.
• To avoid an electric shock from the device,
please disconnect the mains voltage (switch
off circuit breaker). Failure to observe the
installation instructions can cause fire or
other hazards.
• The installation may only be carried out
in standard flush-mounted boxes with a
minimum depth of 40 mm.
• Observe the permissible wires and wire
cross-sections when connecting to the device
terminals.
• Pay careful attention to the wiring diagram!
• The product is intended for indoor use only.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not continue to operate the product if it
becomes visibly damaged.
• Switch on and use only with the safety covers
closed.
2
2. It's so simple:
• Download the Hama Smart Solution app from
the Apple App Store or on Google Play.
• Start the Hama Smart Solution app
• If you're using it for the first time, you'll have to
register and create a new account. If you already
have an account, log in using your login details
• After installation of the switch (by a qualified
electrician), the blue LED flashes quickly. If it does
not flash, press the button for about 6 seconds
until the LED flashes.
• Now click + in the upper-right corner and select
Switch.
• Confirm with Device is flashing quickly.
• Now enter the name of your WiFi network and the
password, and confirm with Confirm.
• The switch is now connected.
• Once it has been successfully added, you can
set up, control and configure the WiFi switch
with the app.
3. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.