Operation
Display board
Remote controller
5
About constant temperature dehumidification operation:
when constant temperature dehumidification runs, if the room temperature is 3
temperature, the air conditioner will automatically decrease the temperature and dehumidify; if the
temperature deviation is less than 3
dehumidify, so these can make the temperatures of the air inside and outside near to each other and
avoid the cold airflow blowing people.
All manuals and user guides at all-guides.com
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
rapidly.
Every time the button is pressed, temp.setting
decrease 1
rapidly.
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
5.Unit stop
Press ON/OFF button, the unit stops.
o
C , the air conditioner will automatically keep the temperature and
10
Dry Operation
AUTO COOL
DRY
FAN
HEAT
o
C,if kept depressed, it will increase
o
C,if kept depressed, it will decrease
LOW
MED
HI
AUTO
o
C higher than the set