Dimmer Curves; Service Menu - Cameo OPUS W5 Manual De Usuario

DIMMER CURVES

Linear
DMX value

SERVICE MENU

Starting from the main display, press ENTER to go to the main menu. Use the
keys to select the Service menu and press ENTER.
Service
Calibrate
512
Test Manual
Reset Motor
USB Update
Factory Reset
This will take you to the submenu for adjusting the submenu options (select via
via ENTER, change value via
Calibrate - Calibrate the components with values of 000 to 255 (Password 050).
Test Manual - Manually test the components with values of 000 to 255.
Reset Motor - Reset the motors. All = All motors, Pan&Tilt = pan and tilt motors, Head Only =
motors in device head.
USB Update - Firmware update via USB interface. OFF = Stop firmware update via USB interface. ON
= Allow firmware update via USB interface.
Factory Reset - Reset to factory settings.
DEVICE INFORMATION (Info)
Starting from the main display, press ENTER to enter the main menu. Use the
select the information menu Info and press ENTER.
Info
Error Info
512
Temperature
Firmware
Exponential
DMX value
and , confirm via ENTER).
Logarithmic
DMX value
and
and
S-curve
DMX value
control
and , confirm
controls to
23