Introduction; Fcc Compliance Statement - Leviton vizia rf+ VRCPG Guia Del Usuario

All manuals and user guides at all-guides.com

INTRODUCTION

Leviton's Programmer/Remote, Cat. No. VRCPG, is a multi-functional
device. It uses Z-Wave technology to act as a programmer, zone
®
or scene controller, remote and timer for setting up and operating
your Vizia RF + network. This manual will guide you through the
TM
understanding of your VRCPG functions as a setup controller. Once
your network is installed, your VRCPG may also be used as a wireless
controller for activating events, and controlling your lighting system.
Your VRCPG comes with rechargeable batteries, a programmer/
remote stand, and a power adapter. NOTE: This product is designed
to work with other Z-Wave
Z-Wave nodes of other types and product categories can be added to
®
the system, and will also act as repeaters if they support this function
of repeating the signal received to other modules in the system.
NOTE: Upon initial installation, you will need to charge your VRCPG
for twelve (12) hours before programming and use.
WARNING: Leviton only supports the use of the supplied rechargeable
Ni-MH "AA" size batteries.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.
FCC CAUTION: Any changes or modifications not expressly approved by Leviton
Manufacturing Co., Inc., could void the user's authority to operate the equipment.
enabled devices from any manufacturer.
®
VRCPG
Programmer/Remote
VRCPG
Stand
Power
Adapter
3