Powering On The Installation; User Interface; The Video Entry Phone - SOMFY V 350 Manual De Instalacion Y Uso

V®350 video entry phone
5.4 Powering on the installation
Once installation is complete, reconnect the gate motorisation to the
power supply.
Then connect the monitor mains adaptor to a power socket, or
reactivate the current on the switchboard.
Important: The mains adaptor must be installed close to the monitor
and must be easily accessible.
®
The V 350 video entry phone brings together two worlds: on the one hand the video entry phone world, and on the other that of
Somfy RTS home wireless control equipment.
The first world is based on functions such as:
- communication between the door station and the monitor,
- consultation, deletion and export of photos,
- opening the electric latch/lock and the gate ,
- the settings (e.g.: contrast, brightness, ringtone, etc.).
The second world is that of the Somfy RTS home equipment wireless control (e.g.: roller shutters, lights, garage door, etc.).
6.1 The video entry phone
6.1.1 Start screen and basic settings
When switching on for the first time, the screen displays the Somfy
logo for a few seconds before opening the basic settings.
Each step must then be validated to move onto the next step and access
the start screen.
Note: in the event of a power cut, these settings remain in the monitor's
memory.
To select a function, press the LED to the right of the pictogram displayed on the screen, for example:
Up
Down
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.

6 - USER INTERFACE

Next setting
Confirmation
EN
10