Compressed Air Connection - Dent Fix Equipment DF-SPR70 Manual De Uso

This manual contains safety and operating instructions. Read it carefully before using the device for the first time and
keep it in a safe place for future reference.
DESCRIPTION
Thank you for your choice in order to get the maximum benefit from your purchase, please carefully read the following
instructions:
The riveter has been specifically made for the main types of rivets used and is homologated for car body repair:
• Self-piercing rivets
• Flow-form rivets
HANDLING
The correct handling procedures are explained in this user manual. It is vital that the Dent Fix Equipment operating
procedures are followed.

COMPRESSED AIR CONNECTION

SETTING UP AN ARM
Choose an arm and prepare the locking pin (1). Put the arm with
care on the riveting machine nose, making sure that the 2 points of
reference are aligned.
For the implementation of large arms (eg, HR210, HR310), it is advi-
sable to lay the arms flat on a table and bring the nose of the riveting
machine in the arm's fitting.
5
SELF PIERCING RIVETER 10T NOM DU OU DES PRODUITS
Maximum air pressure:
Make sure that the air pressure does not exceed 145 PSI.
Clean compressed air:
Make sure you use only clean and dry compressed air for supply the riveting machine. Moisture
and impurities can lead to system failures and/or damage to the riveter.
EN FR
5