Beper P102SBA007 Manual Del Usuario página 10

EN
Precautions
Read the following instructions carefully, since they give you useful
safety information about installation, use and maintenance and help
you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special
attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have
to be accessible to the children, in order to preserve them from danger
sources. It is recommended not to throw these packing material in the do-
mestic waste, but to deliver them to the appropriate station of collection or
destruction refusals, asking eventually information to the manager of the
Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corre-
sponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable
plug by qualified personnel only, which shall also ensure that the section of
the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recom-
mended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, ma-
king sure that the capacity absorption limit marked on the simple adaptors
and the extensions and the maximum power limit marked on the multiple
adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open.
10