Assembly Prior To Installation - Jotul Scan Andersen 4-5 Instrucciones Para Instalación

4.3 Chimneys and flue pipes
• The fireplace can be connected to a chimney and flue
pipe approved for solid fuel fired appliances with flue gas
temperatures specified in «2.0 Technical data".
• The chimney's cross-section must be at least as big as the
flue pipe's cross-section. See «2.0 Technical data» when
calculating the correct chimney cross-section.
• Several solid fuel fired appliances can be connected to the
same chimney if the chimney's cross-section is sufficient.
• Connection to the chimney must be carried out in accordance
with the installation instructions from the supplier of the
chimney.
• Before making a hole in the chimney the fireplace should be
test-mounted in order to correctly mark the position of the
fireplace and the hole in the chimney. See fig. 1 for minimum
dimensions.
• Ensure that the flue pipe is inclined all the way up to the
chimney.
• Use a flue pipe bend with a sweeping hatch that allows it
to be swept.
Be aware of the fact that it is particularly important that
connections have a certain flexibility in order to prevent
movement in the installation leading to cracks.
Chimney draught; See «2.0 Technical data». If the draught is
too strong you can install and operate a flue damper to control
the draught.

4.4 Assembly prior to installation

• The product comes ready assembled in two packages:
• Remove the product from the packaging and check for visible
damage and that the control handles work. Lift the ash lip
and service box out of the burn chamber.
• IMPORTANT!: A sheet of foam plastic is placed between
the baffle and the exhaust deflector for protection during
transport. Be sure to remove this before using the fireplace
for the first time.
All manuals and user guides at all-guides.com
4.5 Fitting the convection panels
Fig. 3
1. Fit the convection panels (Fig. 3 - 1) using the screws and
4.6 Fitting the soapstone panels
(optional extra)
Fig. 4
1. Fit the legs (Fig. 4 - 1) using the screws (Fig. 4 - 2) and adjuster
2. Fit the legs (Fig. 4 - 1) using the screws (Fig. 4 - 2) and adjuster
3. Secure the soapstone panels (Fig. 4 - 4) using nuts and bolts
3
2
washers provided (Fig. 3. - 2).
5
3
1
2
screws (Fig. 4 - 3).
screws (Fig. 4 - 3).
(Fig. 4 - 5).
ENGLISH
1
5
4
37