Control Panel And Remote - LG LP1200SDR Guía De Usuario

CONTROL PANEL AND REMOTE

7
6
NOTE:Please press the
Operation of functions is the same when using the remote or the
control panel, unless otherwise stated.
For detailed instructions on each function, see the follow ing pages
1
POWER ON/OFF
Turns the air conditioner on and off. When turning on,
a rising tone will sound to confirm. When turning off,
a descending tone will sound.
AUTO CLEAN
2
The AUTO CLEAN function is used to remove
moisture from the heat exchangers and helps
prevent odor from forming. This function can be
activated from the Remote only.
3
FAN
Adjusts the circulation fan speed between low (F1),
medium (F2), and high (F3).
4
MODE
Switches the air conditioner between COOL, FAN,DRY,
and ENERGY SAVER modes. The active mode will be
shown in the LCD display.
5 LCD DISPLAY
A PART shows the set temperature (
fan speed, or the selected TIMER delay.
B PART shows the active mode(COOL,FAN,DRY and
ENERGY SAVER),Auto clean,Water full and Timer.
6
/ (TEMP/TIMER)
Use these buttons to adjust the set temperature up or
down, or to adjust the timer delay time.
TIMER
7
Allows you to set a delay from 1 to 24 hours that will
turn the air conditioner on or off automatical ly.
PA RT S A N D F E AT U R E S
A PART
5
B PART
part to operate the button.
or ) ,
℃
℉
8
9
FAN
6
3
7
8
Use this button,the temperature display can be switched
between degrees Celsius(
℃
AUTO SWING
Sets the motorized air discharge to oscillate,
improving air circulation in the room. This function
c an only be activated and displayed from the remote
control.
1
4
3
5
1
4
9
2
) and degrees Fahrenheit(
℉
7
)