VALBERG WD 8615 B W566C Instrucciones De Uso página 5

B
Using the appliance
Remove transport bolts
WARNING!
You must remove the transport bolts from the backside before using the product.
1
ΠLoosen the 4 transport bolts with a spanner.
 Remove the bolts including the rubber parts and keep them for future use.
Ž Close the holes using the cover caps.
Levelling the washing machine
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
ΠLoosen the lock nut.
 Turn the foot until it reaches the floor.
Ž Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and
steady.
2
6 EN
B
Using the appliance
Connect the water supply hose
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
3
Connect the water supply hose to the water inlet valve and a water tap with cold water
as indicated.
NOTE
Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
WARNING!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
Water
trough
ΠPut it into the water trough.
 Connect it to the branch drain pipe of the trough.
1
7 EN
2