Troubleshooting - voestalpine bohler welding URANOS NX 4000 PME Manual De Instrucciones

TROUBLESHOOTING

E49
E51
EN
E53
E55
E57
E61
E63
E65
E69
E71
E73
E75
E77
8. TROUBLESHOOTING
The system fails to come on (green LED off)
Cause
» No mains voltage at the socket.
» Faulty plug or cable.
» Line fuse blown.
» Faulty on/off switch.
» Connection between wire feed carriage and
generator incorrect or faulty.
E50
E52
E54
E56
E60
E62
E64
E68
E70
E72
E74
E76
E78
Solution
» Check and repair the electrical system as needed.
» Use qualified personnel only.
» Replace the faulty component.
» Contact the nearest service centre to have the system repaired.
» Replace the faulty component.
» Replace the faulty component.
» Contact the nearest service centre to have the system repaired.
» Check that the various parts of the system are properly connected.
90