Publicidad
Idiomas disponibles
Idiomas disponibles
SYSTEM SETUP
Aspect Ratio:
There are two choices : 4:3 and 16:9 in this item. You can set the aspect ratio according to
your requirement.
View Mode: There are four choices : Fill, Original, Auto Fit and Pan Scan in this item . You
can set the view mode according to your requirement.
TV System: There are three choices : NTSC , PAL-M and AUTO in this item . You can set
the TV system according to your requirement. If your TV set has only NTSC or PAL-M
system, the screen will blink and become colorless when a wrong system is selected.
NTSC: Set the TV system at NTSC. This system is used in USA, CHINA TAIWAN, JAPAN
etc.
PAL-M: Set the TV system at PAL-M.
AUTO: The TV system is auto switched according to the disc system.
Video Out:
S-VIDEO: Set to this item when connecting to S-VIDEO terminal.
Component: Set video output in analog component video format when connecting to Y/U/V
terminals.
P-Scan: Set progressive YUV signals. Connection same as YUV.
Note: :
If the video setting differs from the physical connection, the TV set may be without
picture. In case of this, you can RESET the machine, then keep pressing key [V-MODE]
until the picture is OK again.
- 46 -
Publicidad
