Uline H-4066 Manual Del Usuario página 2

3. Slide footring onto the gas lift and tighten knob to
secure. (See Figure 3)
Figure 3
Footring
Gas Lift
2
3
4
PAGE 2 OF 6
ASSEMBLY CONTINUED
Knob
STOOL ADJUSTMENTS
1
4. Slowly lower stool assembly onto the gas lift. Press
down on seat to secure. (See Figure 4)
Figure 4
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Back Height – To raise the back, lift the back
cushion until it clicks into the desired height. To lower
the back, lift the back cushion to its tallest height to
release ratchet mechanism, then push it down to the
lowest height setting.
3. Seat Depth – To adjust seat depth, loosen knob and
slide the back in or out. Set back at your preferred
seat depth and tighten knob to secure.
4. Footring Height – To adjust footring height, loosen
knob and slide the footring up or down. Set footring
at your preferred height and tighten knob to secure.
1-800-295-5510
uline.com
Stool
Assembly
Gas Lift
0621 IH-4066