INTRODUCTION
The SHOW-REC-1024 is a very useful and versatile DMX tool. It can acts as a DMX recorder, signal
booster, ArtNet to DMX signal converter, DMX merger. To optimize the performance of this product,
please read the user manual carefully before use.
WHAT IS INCLUDED
The following items are included in the box:
- 1pc SHOW-REC-1024
- 1pc 16G SD card
- 1pc 1,5 meters power cable schuco-powercon
- 1pc User Manual
Carefully unpack the carton, check the contents to ensure that all parts are present, and have been
received in good condition. Contact your supplier immediately and retain packing material for
inspection if any part is missing or damaged.
SAFETY INSTRUCTION
WARNING !!! To reduce the risk of fire, electric shock, or injury to persons, follow
these important safety instructions:
• This product is intended for indoor use only!
• Always turn off, unplug power and allow fixture to cool before servicing.
• Ensure that fixture is properly grounded.
• Please keep this User Guide for future consultation.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• The unit must be installed in a location with adequate ventilation. Be sure no ventilation slots are blocked.
• Make sure power cord is never crimped or damaged.
• Do not remove the top cover under any conditions. There are no user serviceable parts inside.
• Disconnect the unit's main power when left unused for long periods of time.
• Never connect this unit to a dimmer pack.
• Never operate this unit when it's cover is removed.
ENGLISH
User Manual | SHOW-REC-1024 by Triton Blue | October 2021 | www.triton-blue.com
11.