Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
2.
Before using battery charger, read all instructions and cautionary markings on battery charger,
battery, and product using battery.
3.
Do not expose charger to rain or snow.
4.
Use of an attachment not recommended or sold by the battery charger manufacturer may result in a
risk or fire, electric shock, or injury to persons.
5.
When operating the tool from a elevated position, be aware of people or things beneath you.
6.
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
Operating the Trigger Switch:
•
Turn the Drill/Driver on by depressing the trigger switch.
•
Use the reversing switch to change the direction of rotation.
•
The Forward/Reverse Switch has three positions: Forward, Reverse, and Off (middle).
•
Always check the rotation before beginning your work.
Work Light:
•
Your Drill/Driver is equipped with a built in LED work light that lights when ever the
trigger switch is depress. This light provides additional light to help illuminate the
work area.
•
It is advised that available ambient light be used in conjunction with the work light
when ever possible.
3/8" Key-Less Chuck:
•
Your Drill/Driver is equipped with a keyless chuck, so you can quickly change bits with
no extra tools required.
•
To insert or change bits, put the reversing switch in the off position. Hold the collar of
the chuck with one hand and rotate the body of the chuck to tighten or loosen.
•
Always make sure that bits are seated firmly between the chuck jaws. Never attempt to
operate a bit that is wobbly, unstable, or broken.
Clutch (Torque) Settings:
•
During screw driving applications, you can adjust the maximum torque that the stick
driver will produce.
•
This feature can be used to prevent the stripping and breaking of screws, or to set a
series of screws to a depth that fits your project.
•
Set the clutch ring at the front of the drill to settings from 1 (lightest) to 23 (heaviest).
•
In general, you will find the lower torque settings more useful with smaller screws and
the higher torque settings more useful for larger screws.
WARNINg:
Forcing a bit, bending or twisting the bit, or failure to maintain balance in case of binding
and breakthrough can result in serious personal injury.
General Screw driving:
•
Clamp your work piece.
•
Drill pilot holes for larger screws or when driving screws into hardwoods.
•
Exert enough pressure to start the screw and keep it turning. Do not force the screw.
Let the tool do the work.
•
Use a speed that will not strip the screw head or break the screw. Maintain your
balance.
General drilling:
•
Clamp your work piece. Use torque setting 23 then exert enough pressure to start the
drill bit and keep it cutting. Do not force or stall the bit. Don't bend or twist the bit. Let
the tool and the blade do the work.
•
Maintain your balance and be prepared for binding and for when the bit breaks through
the material.
English
Publicidad
Tabla de contenido
