Transportation And Storage - Ryobi RLM18X33B40 Traducción De Las Instrucciones Originales

The battery pack has overheat protection.
Excessive temperatures will cause the battery
to stop powering the product. Feel the battery
pack; if it is too warm, allow it to cool down
before resuming operation. If the product still
does not work, recharge the battery.
NOTE: The battery pack LED indicator will
not work if the battery protection feature has
caused the battery pack to stop powering the
product. Release the on-off button or remove
the battery pack from the product and the
battery pack LED indicator will resume normal
function.
NOTE: The latch should snap into place when
the battery pack is properly inserted into the
product.
GENERAL MOWING TIPS
The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
Suggested height
Grass adjustment
conditions
First pass
Very thin / Dry 3
Thin / Dry 4
Medium /
5
Dense
* battery: RB18L40
■
For best performance, always cut off one-
third or less of the total height of the grass.
■
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■
New or thick grass may require a higher
cutting height.
■
If you wish to collect the grass cuttings
for disposal, remove the mulching plug
and fit the grass catcher making sure the
grass discharge chute cover is properly
4 | English
Coverage
(maximum)
Succeeding 4 Ah 5 Ah
passes battery battery
2
2 200 m 250 m
3 → 2
2
150 m 200 m
4 → 3
100 m 2 150 m
Autogoods "130"
closed. Empty the grass catcher regularly;
otherwise, the discharge chute will become
blocked with grass cuttings.
■
If you are making a light cut and wish
for the grass cuttings to remain on the
lawn, fit the mulching plug and close the
grass discharge chute cover to cover the
discharge opening. It is not necessary to fit
the grass catcher in this case.
■
The product is designed to operate and cut
most effectively when moving forwards.
■
A higher cutting height will extend the run
time of the battery.

TRANSPORTATION AND STORAGE

■
Turn off the product, remove the isolator
key, and the battery pack. Make sure all
moving parts have come to a complete
stop. Allow the product to cool down before
storing or transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store outdoors.
■
For transportation in vehicles, remove
2 isolator key and secure the product against
movement or falling to prevent injury to
persons or damage to the product.
2
2
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
or transportation, the blade is sharp, keep
all body parts away from the blade while it
is exposed.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
WARNING