Querying The Inside And Outside Temperature; Querying The Filling Levels; Querying The Battery Voltages; Activation / Deactivation Of The Pump - Calira Check-Panel 20 Instrucciones De Uso

Querying the inside and outside temperature

By pressing the button (1), the temperature menu is activated
showing the inside (IN) and outside temperature (OUT).
IN
.
22.5 C
– This is displayed in steps of 0.5 ºC.
– The scale is display from a temperature of > 0 ºC.

Querying the filling levels

By pressing the button (2), the filling menu is activated show-
ing the filling levels of the fresh water and waste water.
50%
Fresh water
– This is displayed in steps of 25 %.
OUT
.
21.5 C
50%
Waste water

Querying the battery voltages

By pressing the button (3), the battery-menu is activated
showing the battery I (starter battery) and the battery II
(supply battery).
12.4V
Battery I
– This is displayed in steps of 0.1 V.

Activation / Deactivation of the pump

By pressing the button (4), the pump is activated via the pump
relay in the power supply.
When the pump is active, the symbol is inverted (dark back-
ground – light symbol).
Pump is activated
By pressing the button again, the pump is deactivated and the
symbol is shown normally (light background – dark symbol).
Pump is deactivated
12.4V
Battery II
13