Kärcher K 3.540 Manual De Usuario página 8

This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present
in the water inlet or outlet. This is normal
and will not affect the performance of
the pressure washer.
STEP 1:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 2:

Insert the high pressure hose tightly
into the quick coupling on the appli-
ance, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by
pulling on the high pressure hose.
8
English
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
Disconnect:
Push the casing of the quick cou-

pling for the high pressure hose to-
ward the rear and disconnect the
high pressure hose from the appli-
ance.
STEP 3:

Install the supplied connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 4:

Screw the supplied garden hose
connector on to the end of your gar-
den hose. Push the garden hose
connector on to the water inlet con-
nector and make sure you hear it
click into place before proceeding.