Technical Data - Zamel RCR-01 Manual Del Usuario

TECHNICAL DATA

Input rated voltage:
Battery type:
Battery life:
Number of channels:
Twilight sensor adjustment range:
Transmission:
Coding way:
Coding:
Maximum transmit power:
Range:
Optic signalling of transmitter's operation:
Ambient temperature range:
Operating position:
Casing mounting:
Casing protection degree:
Protection level:
Pollution degree:
Dimensions:
Weight:
OPERATION
The device can operate in two modes: 1. Motion sensor, 2. Motion sensor with twilight switch. Opera-
tion modes are adjusted by means of two switches which are under the top cover of the sensor. Mode
1 - adjust the switch to „C" position, Mode 2 - adjust the switch to „F" position. It is important to adjust
the switches in the same position, otherwise they operate incorrectly. In the operation mode with
a twilight sensor adjust luminous density by means of a potentiometer. Potentiometer adjustment to
„ " sign means operation adjustment during daylight - about 20 lx, and potentiometer adjustment
to „ " sign means operation adjustment during night - about 2 lx. Radio transmission range (up to
200 m - depending on a receiver) can be increased by means of a retransmitter or few RTN-01
retransmitters.
Battery bases
Operation mode switches
Motion sensor lens
Optic signalling range of operation
PROG push-button
Sensitivity potentiometer
3 V DC
2 x AAA / R03
1 year (depending on use)
1
2 ÷ 20 lx
radio 868 MHz
unidirectional
addressing transmission
ERP < 20 mW
up to 200 m in the open area
LED red diode
-10 ÷ +55 °C
free
wall plugs, double-sided adhesive tape
IP20
III
2
Ø70 x 40 mm
0,075 kg